IMPROVEMENTS TO INSTALL WINDOWS XP WITHOUT REVIEW

If Windows XP damaged (corrupted) where you have no other operating system to boot,You can do a repair installation (Repair Install) who works as the settings (setting)the beginning. Then ...
* Make sure you have the key (key) Windows XP is valid.* The entire process will take approximately 1 / 2 or 1 hour, depending on the spec of your computer.* If you are prompted for an administrator password, you should choose the repair option (repair) the second,not the first.* Insert your Windows XP CD and boot from the CD.* When it appears the second repair option R = Repair, press the RThis will start the repair.* Press the F8 key to agree to proceed "I Agree at the Licensing Agreement"* Press R when the directory where you installed Windows XP. Usually C: \ WINDOWSIt will then check the C: drive and start copying files.And automatically restart if necessary. Leave the CD in the drive.* Next you will see a picture of "progress bar" that is part of the improvement,he looks like a normal XP installation, including "Collecting Information, Dynamic Update,
Preparing Installation, Installing Windows, finalizing Installation
* When asked, click the Next button* When asked to enter a key, enter key (key) your valid Windows XP.* Normally you want to remain in the same Domain or Workgroup.* The computer will restart.* Then you will have the same screen as the activation of the system when a normal installation.* Register if you want (usually not necessary).* Done;)
Now you can log in with your existing account.NTOSKRNL Damaged or Missing (Missing or Corrupt)
If you find an error message that "NTOSKRNL not found" / NTOSKRNL not found, do:
* Insert the Windows XP CD and booting from the CD.* At the time of R = Repair option appears first, press the R key
* Press the number corresponding to the location of the Windows installation you want to repair.* Usually # 1* Change to the CD ROM drive is located.* Write: CD i386* Write: expand ntkrnlmp.ex_ C: \ Windows \ System32 \ ntoskrnl.exe* If Windows XP is installed elsewhere, change according to location.* Remove your CD and type EXIT* Done
Damaged or Missing HAL.DLL (Missing or Corrupt)
If you get an error regarding a missing or corrupt hal.dll file, it is possibleBOOT.INI file has the wrong configuration (misconfigured).
* Insert the Windows XP CD and booting from the CD.* At the time of R = Repair option appears first, press the R key* Press the number corresponding to the location of the Windows installation you want to repair.* Usually # 1* Type bootcfg / list
Menampilkn content / feedback on the current BOOT.INI file
* Type bootcfg / rebuild
Improve the configuration of the BOOT.INI file
* Remove your CD and type EXIT
Directory \ WINDOWS \ SYSTEM32 \ CONFIG damaged or missing
If you get an error with the inscription:
"Windows Could not Start Because the following files is missing or corrupt\ WINDOWS \ SYSTEM32 \ CONFIG \ SYSTEM or \ WINDOWS \ SYSTEM32 \ CONFIG \ SOFTWARE "
* Insert the Windows XP CD and booting from the CD.* At the time of R = Repair option appears first, press the R key* Press the number corresponding to the location of the Windows installation you want to repair.* Usually # 1* Enter the administrator password if necessary.* Write: cd \ windows \ system32 \ config* Next depending on the location of the damage:* Write: ren ren system software software.rusak OR system.rusak* Next again also depends on the location of the damage:* Write: copy \ windows \ repair \ system* Write: copy \ windows \ repair \ software* Remove your CD and type EXIT
NTLDR or NTDETECT.COM not found (NTLDR or NTDETECT.COM Not Found)
If you find an error that NTLDR is not found when booting:
1. For the type of FAT
Please you boot from the Win98 floppy and copy the NTLDR or NTDETECT.COM filefrom the i386 directory to the drive stem / root (root) C: \
2. For the type of NTFS partition
* Insert the Windows XP CD and booting from the CD.* At the time of R = Repair option appears first, press the R key* Press the number corresponding to the location of the Windows installation you want to repair.* Usually # 1* Enter the administrator password if necessary.* Enter the following command, where X: is the address of the CD ROM drive (Sesuaikan!).* Write: COPY X: \ i386 \ NTLDR C \:* Write: COPY X: \ i386 \ NTDETECT.COM C: \* Remove your CD and type EXIT